Hobart FD3-150 Bedienungsanleitung PDF herunterladen

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

F-8560 – FD3-150 FD3-200 FD3-300 Foodwaste Disposers Page 1 of 4

FD3-150 FD3-200 FD3-300

FOODWASTE DISPOSERS

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

FD3-150 FD3-200 FD3-300 FOODWASTE DISPOSERS

MOTOR SHAFT SEAL: Face-type seal consists

of sintered bronze mating ring and spring loaded

carbon ring insert in chemical resistant neoprene

bellows. Mating surfaces are protected from grit or

ﬁbers by being recessed into ﬂywheel. Should any

moisture pass this seal, a ﬂinger and drain tube

are provided to insure immediate removal. In

addition, a lip-type oil seal (located beneath the

bearings) is an “added protection” water seal.

DRAIN CONNECTOR: The removable outlet

ﬂange is tapped for 2” pipe connection.

DUAL DIRECTIONAL GRINDING: Hobart

Disposers operate in either direction of ﬂywheel

rotation. Direction of rotation can be controlled by

the operator (to increase life and efﬁciency of

grinding elements – back ﬂywheel free of a “jam”)

when installed with Control Groups 2 or 3.

WEIGHT: Shipping – Approx. 95 lbs. (does not

include accessory group or controls).

MEDIUM SIZE

FAST, ECONOMICAL

In a proﬁtable foodservice operation, there’s no

space, time or budget allowance for inefﬁcient

food waste handling. Here are the medium sized

disposers that can end food waste storage,

removal and clean-up – fast, economically.

SPECIFICATIONS

Listed by Underwriters Laboratories Inc. and meets requirements of

A.S.S.E.Standard No. 1009 (50 Hz. Electrical Speciﬁcations not U L

Listed).

MOTORS: Continuous duty rating, equipped with

manual reset thermal overload inherent protection.

Permanently lubricated ball bearings for upper and

lower shaft support.

HOUSINGS: Heavy aluminum grind and discharge

housings. Four bolts fasten the motor unit to the

grind chamber, permit easy removal.

LEGS: Tubular stainless steel with bullet feet to

support housing. Adjustable to 3 inches in either

direction.

MOUNTING: All Hobart Disposers fasten to 7" I.D.

(throat opening) cones. A vinyl isolating ring

eliminates metal-to-metal contact at the cone

mounting, reduces vibration and noise

transmission.

STATIONARY SHREDDER RING: Abrasion

resistant, Ni-Hard, 2

⁄4" high, 4 machine ground

primary action breaker bars, 42 secondary action

grinding teeth.

FLYWHEEL: Offset breaker blade, mounted at

center, speeds grinding, prevents objects from

“riding” at center. Two hardened stainless steel

cutter blocks (fastened to ﬂywheel with nylon

locking screws) are replaceable, can be indexed

for new cutting edges. Corrosion resistant

Ni-Resist ﬂywheel is 7

⁄16” diameter, slots undercut

the shredder ring to assure that particles are cut to

proper size before passing to the drain line.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - FOODWASTE DISPOSERS

Item # _____________________________________Quantity ___________________________________C.S.I. Section 11400 F-8560 – FD3-150 FD3-200 FD3-300 Foodwa

Seite 2

701 S Ridge Avenue, Troy, OH 453741-888-4HOBART • www.hobartcorp.comFD3-150 FD3-200 FD3-300FOODWASTE DISPOSERSPage 2 of 4 F-8560 – FD3-150 FD3-200

Seite 3

FD3-150 FD3-200 FD3-300FOODWASTE DISPOSERS701 S Ridge Avenue, Troy, OH 453741-888-4HOBART • www.hobartcorp.comF-8560 – FD3-150 FD3-200 FD3-300 Foo

Seite 4

701 S Ridge Avenue, Troy, OH 453741-888-4HOBART • www.hobartcorp.comPage 4 of 4 F-8560 – FD3-150 FD3-200 FD3-300 Foodwaste DisposersAs continued pr

Kommentare zu diesen Handbüchern

Keine Kommentare

Hobart FD3-150 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schweißsystem Hobart FD3-150 herunter. Hobart FD3-150 User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem Hobart FD3-150